BWKSZ - 120492L DZ PRIMERS
- MSDS: BWKSZ
- Manufacturer: PPG INDUSTRIES INC
- Product Name: 120492L DZ PRIMERS
- National Stock Number: 8010-00F038170
Product Identification
Product ID:120492L DZ PRIMERS
MSDS Date:01/31/1995
FSC:8010
NIIN:00F038170
MSDS Number: BWKSZ
Responsible Party
ALLISON PARK, PA 15101-5000
US
Emergency Phone: 304-843-1300/412-492-5555
Info Phone: 412-492-5555/216-572-6111
Cage: DO542
Contractor
Telephone: 412-492-5555
Cage: DO542
Ingredients
TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN BY
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 2-5%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
PIGMENTS
Fraction By Weight: 35-40%
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE (IARC - GROUP 3) *94-4*
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 20-25%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
BUTYL ACETATE (N-BUTYL ACETATE) *94-4*
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 2-5%
OSHA PEL 710 MG/CUM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
FILM, FORMERS, RESINS & ADDITIVES
Fraction By Weight: 25-30%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: HARMFUL,
RESPIRATORY SYSTEM/NOS/THROAT IRRITATION, BRAIN/NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS,
LOSS OF COORDINATION, REDNESS, ITCHING, BURNING SENSATION, VISUAL
DISTURBANCES, DRYNESS, CRACKING, BURNING, SWELLING, IRRITATION.
First Aid
First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: FLUSH IMMEDIATELY W/PLENTY OF
WATER FOLLOWED BY WASHING W/SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. GIVE CPR IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.5
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WEAR SCBA. WATER SPRAY MAY BE INEFFECTIVE.
WATER SPRAY MAYBE USED TO COOL CLOSED CONTAINER. IF WATER IS USED,
FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. TOXIC GASES MAY FORM WHEN PRODUCT IS
CONTACTED BY FLAME/HOT SURFACES.
Accidental Release
Spill Release Procedures:STEPS RELEASED: PROVIDE VENTILATION. EVACUATE
AREA. REMOVE IGNITION SOURCES. TAKE UP W/NONCOMBUSTIBLE ABSORBENT
MATERIAL & PLACE IN CLEAR EMPTY CONTAINERS FOR DISPOSAL.
Handling
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS B FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. INTENTIONAL MISUSE
OF DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE
HARMFUL/FATAL.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED AIR PURIFYING /AIR SUPPLIED
RESPIRATORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST.
Protective Gloves:NITRILE RUBBER/NEOPRENE RUBBER
Eye Protection:CHEMICAL TYPE SPLASH GOGGLES
Other Protective Equipment:FULL FACE SHIELD, PROTECTIVE CLOTHING,
IMPERMEABLE APRON.
Work Hygienic Practices:DISCARD CONTAMINATED CLOTHING, SHOES/GLOVES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:149-293F
Vapor Pres:28.5
Vapor Density:>1
Spec Gravity:1.2-1.3
Appearance and Odor:VISCOUS LIQUID W/CHARACTERISTIC ODOR.
Percent Volatiles by Volume:61
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, SPARK, OPEN FLAMES, HOT
SURFACES & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE, PROVINCIAL &
LOCAL REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.